FLIR ThermaCAM PM575, Operator'S Manual

Page: 47 / 68

[ 5.5.4.2.8 — Scale ]
© FLIR Systems AB – Publ. No. 557 369 – Ed. A 39
the subject headings and user-defined values are displayed. If None is selected,
no text comments will be displayed, unless the operator selects Text comments…
in the File menu.
5.5.4.2.8 Scale
A scale (colour bar) can be selected by setting this parameter On . The scale
shows how the colours are distributed over the various temperatures in the image
with high temperatures at the upper end and low temperatures at the lower end.
The small boxes above and below the scale display what colours are used for tem-
peratures outside the scale.
5.5.4.3 Local adapt...
By pressing the
↵
button when Local adapt... is highlighted in the Setup menu, the
Setup – Local adaptations dialog box is displayed on the screen. By moving the
joystick up/down the different dialog box items are selected, i.e. Temp unit, Dist
unit, Language, Date format and Time format . By moving the joystick left/right the
item parameters will be changed. When the
↵
button is pressed the parameters
are stored and the dialog box is removed. If the C button is pressed the dialog box
is removed without storing any changed parameters.
Temp unit: °C (degrees Celsius) or °F (degrees Fahrenheit).
Distance unit: Meters or feet.
Language: The different languages depend on what modules have been
downloaded to the camera.
Date format: MM/DD/YY, DD/MM/YY or YY-MM-DD.
Time format: HH:MM:SS, HH:MM:SS PM or HH.MM.SS.
5.5.4.4 Save options...
By pressing
↵
button when Save options... is highlighted in the Setup menu, the
Setup – Save options dialog box is displayed on the screen. By moving the joy-
stick up/down the different dialog box items are selected, i.e. Image storage,
Prompt comment?, Image naming, Image file type and BMP file content . By mov-
ing the joystick left/right the item parameters will be changed. When the
↵
button
is pressed the parameters are stored and the dialog box is removed. If the clear
button
C is pressed, the dialog box is removed without storing any changed
parameters.
5.5.4.4.1 Image storage
If this parameter is selected as Single one image will be stored on the disk after
pressing the S button for an extended period of time. If Continuous is selected,
images will be stored as fast as possible, for as long as the S button is pressed.