FLIR ThermaCAM PM575 Operator'S Manual Download Page 46 | Manualshive

Page: 46 / 68

background image

[

5.5.4.2.4 — Saturation col.

]

ThermaCAM™ PM575/595

Operator’s Manual

38

5.5.4.2.4

Saturation col.

Saturation colour is an on/off function. If

On

is selected the areas that contain

temperatures outside the present level/span settings are coloured with the satura-
tion colours. The saturation colours contain an »overflow« colour and an »under-
flow« colour.

There is also a third red saturation colour that marks everything saturated by the
detector indicating that the range should probably be changed.

5.5.4.2.5

Data field

This parameter determines the amount of data/information that will be shown on
the screen. There are four levels:

Reduced, Normal, Extended

and

None

.

Figure 5.21

Extended data presentation.

In

Reduced

mode, only the lower line is displayed. In

Normal

mode the lower and

middle lines are displayed. In

Extended

mode all three lines are displayed.

• The lower line contains information on the date, time, emissivity and zoom factor.
• The middle line contains information on filter setting (optional) and lenses. If no

filter is enabled, the text

Filt = NOF

is displayed. If a high temperature filter is

enabled, the text

Filt = AP1

is displayed. The lense that is currently being used

is indicated as

FOV 12, FOV 24

or

FOV 45

¸ e.g. 12°, 24° and 45° field of view,

respectively. In this line the selected temperature range is also displayed, i.e.

35–1000 °C (95–1832 °F) or -40–350 °C (-40–662 °F).

• The upper line contains information on the current directory, ambient tempera-

ture, relative humidity and object distance.

5.5.4.2.6

Data background

The background of the data can be selected as

Transparent

or

Solid

. If

Transpar-

ent

is selected, the data fields are displayed using the infrared image as a back-

ground. If

Solid

is selected, the data fields are displayed against a near-white

background.

5.5.4.2.7

Text comments

The text comments option can be selected as

None, Value only

and

Label & value

.

If

Value only

is selected, the text comments at the bottom of the screen show only

the user-defined values that the operator has selected when the text comments
were created, e.g. recommendations for repair. If

Label & value

is selected, both

«
...
44
45
46
47
48
...
»

Summary of Contents for ThermaCAM PM575





































































Reviews:

No comments

Related manuals for ThermaCAM PM575

Drive 700 Magnet

Brand: 2E Pages: 36

Brand: Blueskysea Pages: 24

Brand: NIghtRunner Pages: 22

Brand: GoPro Pages: 19

Brand: WISEUPSHOP Pages: 24

FULL HD 5 Megapixel Vehicle Video Recorder

Brand: Vacron Pages: 35

Brand: Parksafe Pages: 8

Brand: T'nB Pages: 22

Brand: Auto Vox Pages: 52

Brand: Pyle Pages: 8

ST-BTLI540IRVF-B

Brand: Security Tronix Pages: 4

Brand: SJCAM Pages: 17

Brand: Abask Pages: 91

Brand: Mini Gadgets Pages: 5

Brand: Falcon Electronics Pages: 7

Brand: Mio Pages: 27

Brand: Gator Pages: 16

Brand: EVO GEARS Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands