manualshive.com logo in svg

FLIR ThermaCAM PM575, Operator'S Manual, Page: 14 / 68

Share
Download
FLIR ThermaCAM PM575 Operator'S Manual Download Page 14

[

3 — Controls and connections

]

ThermaCAM™ PM575/595 

Operator’s Manual

6

3

Controls and connections

3.1

Direct access buttons

The camera is controlled by pressing the direct access buttons and/or using the
joystick control.

Figure 3.1

 Direct access buttons

The 

↵

 (enter) button

 [1] brings up the menu system of the camera in the view-

finder. Make your selection in the menu by using the joystick control. You accept
the menu choice and quit the menu mode by pressing the 

↵

 button. The 

↵

 button

also means 

Accept

 or 

Confirm

.

Press the A (auto) button 

[2]

 

to get the best image in the viewfinder automatically.

When this button is pressed an automatic calibration is also performed.

Press the S (save) button 

[3] shortly to switch between a frozen image and a live

image. To store the image to the PC-card press the 

S

 button for more than 1 sec. 

The C (clear) button 

[4] is used when you need to skip a menu selection without

making any changes and leave the menu mode. The 

C

 button also means 

Escape

or 

Don’t accept

.

Summary of Contents for ThermaCAM PM575





































































Reviews:

No comments