FLIR ThermaCAM PM575, Operator'S Manual

Page: 33 / 68

[ 5.5.1.2 — Save ]
© FLIR Systems AB – Publ. No. 557 369 – Ed. A 25
The index field after the image/directory name contains file order information.
Example:
A file with the name G0112-12 12/23 represents the 12th image in a directory
containing 23 images.
Note that the measurement functions, colour scales and object parameters can be
changed since these are saved with the image and will be used when it is recalled.
To change the directory select Change dir by moving the joystick to the right. The
directories can then be changed by moving the joystick up/down.
5.5.1.2 Save
This function will save the displayed image onto the PC-card disk. Together with
the image all the current conditions, like measurement function, colour scale, zoom
factor, values of the object parameters etc., will be saved to be used again when
the image is recalled. If the save function is activated on a recalled image, a confir-
mation panel will appear on the screen.
Figure 5.12 Confirmation panel; Image exist
→
Create new or Overwrite .
If Create new is selected, the image on the screen will be stored in a new file (with
a new, automatically allocated name) on the disk. If Overwrite is selected, this will
overwrite the recalled image file on the disk.
The same function as choosing Save in the File menu can be activated by press-
ing the S button for more than one second.
If Voice comment is enabled (see “Save options...” on page 39) the voice dialog
will be displayed on the screen. The user can now add a comment to the image
(see “To add a voice comment to an image” on page 11, and “Voice comment...”
on page 26) or just press
↵
to store the image without a voice comment.
Depending on the settings in Setup – Save options ( Setup
→
Save options… ),
images can be saved either in *.IMG file format, *.IMG and *.BMP file formats, or
only *.BMP file format. Later analysis of saved images (e.g. in the
AGEMA ™ Rep-
ort PC software) can only be made if the images are saved in *.IMG file format. If
BMP only or IMG and BMP is selected, the operator can choose if the only the
IR image or the IR image and the graphics (data fields etc.) shall be saved.