FLIR ThermaCAM PM575, Operator'S Manual

Page: 36 / 68

[ 5.5.1.6 — Delete image... ]
ThermaCAM™ PM575/595 Operator’s Manual 28
comments is stored on the PC-card (*.tcf). These text comments can be created
and edited in
AGEMA ™ Report PC software. See the software Operator’s Manual
for further information on creating and editing text comments.
To add a text comment to an image, choose Text comments in the File menu. A
dialog box with multiple choices of text comments appears on the screen. The
choice in each dialog box is confirmed by highlighting the comment and pressing
↵
. This also brings up the next dialog box. Even though only one choice can be
made in a maximium of four different dialog boxes, the number of dialog boxes may
exceed that number. Pressing
↵
in the last dialog box confirms the complete text
comment. Pressing S in any particular dialog box saves that comment and cancels
the following dialog boxes.
N.B. – Text comments can only be made if IMG only or IMG and BMP is selected
in the Setup – Save options dialog box ( Analysis
→
Save options ). If BMP only is
selected, no text comments can be made.
If the option Label & value or Value is chosen in the Setup
→
Image
→
Text com-
ments menu, the text comments appear above the data presentation field at the
bottom of the screen. The suffix T is also added to the saved image, to indicate
that a text comment is attached to the file.
5.5.1.6 Delete image...
This function is used to delete previously saved images from the disk. The function
brings up a control bar showing the name of the image being displayed and the
directory in which it is stored. To select another image to be deleted move the joy-
stick up and down to change the selected image from the directory.
Figure 5.15 Delete Image control bar.
• To change the directory move the joystick to the right. The different directories
can then be selected by moving the joystick up or down.
• To delete an image, select Del Image and press
↵
. The image will be deleted
after confirming Yes and pressing
↵
in the confirmation dialog box.
If the directory is empty it is possible to delete the directory. The dialog box item
Del Image is changed to Del Dir . Deleting the directory is made in the same way
as deleting an image (see above).