FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 80 / 146

September 6, 2017 74
Configuration and Operation
CM-6212 H1-I User and Installation Guide
File Name
·
File Name – Enter a file name in the field, for example image.jpg. The uploaded image’s file name
format is set in this section. Select one that meets your requirements.
·
Add date/time suffix (default setting)
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
·
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
·
Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix ends at the number being set. For example, if the setting is up to “10,” the file
name will start from 00, end at 10, and then start over again.
·
Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static
filename.
Click SAVE after configuring the settings.
9.3.4.6 Manual Trigger
The Manual Trigger screen is used to specify an alarm to be manually triggered. You can define action to
take when an alarm occurs from the System > Events Setup > IO screen.
Manual Trigger Screen