FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 130 / 146

September 6, 2017 124
Appendices
CM-6212 H1-I User and Installation Guide
Analytics
Motion Detection
On/Off, plus sampling pixel interval, detection level, sensitivity
level, and time interval settings.
Regions of Interest
Web interface: Configurable up to 10 ROI masks.
Latitude interface: Configurable up to six ROI masks.
Motion Metadata
Streaming and recorded video includes per frame level motion
metadata. Motion metadata is archive searchable by ROI via the
Latitude Control Center user interface
Triggered Actions
Notifications, On-Event Recording and Relay Output Command.
Includes configurable alarms and broad range of recording on
detection of video and snapshots
Tampering Alarm
On/Off, plus duration, on-event notification, recording to SD card,
recording to NAS, and more are supported as events in Latitude.
IR Illuminator
Working Distance 5 meters (16 ft.) at 360°
Wavelength 850nm
LEDs 4
Network
Interface 10/100/1000Mbps Ethernet, Auto-sensing, Full/Half-Duplex
Services and Protocols
IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP,
SMTP, DHCP, PPPoE, UPnP, IGMP, SNMP, SNTP, QoS, IEEE
802.1X, ONVIF Version 2.4 Profile S
Video Streaming RTSP/RTP
Event Notification HTTP, FTP, SMTP
Event Storage Recordings and snapshots
Password Levels User and Administrator
Security HTTPS, IP Filter, IEEE 802.1x
Firmware Upgrade Flash memory for upgrading camera firmware via HTTP
Operating Systems Windows 7, 8, and 8.1 (64-bit versions)
Internet Browser Microsoft Internet Explorer 10 (32-bit version) and above
User Accounts 20