FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 123 / 146

117 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
ColorNR
The ColorNR setting controls the noise displayed as red, green and blue dots that are visible between light
and dark areas. Four settings are available: Off, Color Low, Color Med, and Color Hi. The highest setting
( Color Hi) maximizes the blending of the color noise with the image, effectively removing the dots, while the
Color Low setting minimizes the blending. The Off setting disables this function. Click SET to confirm the
new settings. The default setting is Color Hi.
9.5.4 IR Function
The IR Function setting activates two functions:
·
The IR Cut (IRC) filter for electronic day/night operation ( IR mode )
·
The IR LED illuminator for use in low-light conditions or at night
IR Function Screen
IR Mode
The day/night IRC switching mechanism operates according to the ambient light level rather than activation
of the IR LED mode. The
IR Mode drop-down menu enables you to select from Auto/On/Off/Smart modes.
The default mode is Smart . Following is an explanation of the four settings:
·
Auto Mode – The camera converts from Day mode (color) to Night mode (monochrome)
automatically at nighttime or in low light conditions. When there is sufficient light, the camera
converts automatically from Night mode to Day mode.
·
On – Activates IR mode (puts camera into monochrome/Night mode).
·
Off – Deactivates IR mode (puts camera into color/Day mode).
·
Smart – Smart mode enhances monochrome/Night mode stability when IR illumination is dominant
and keeps the camera from switching between Day and Night modes. In this mode, the IR Cut filter
is on (i.e. monochrome/Night mode) when the IR LED illuminator also is activated. This prevents
the camera from returning to color/Day mode.
Click SET to confirm the new setting.