FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 71 / 146

65 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
9.3.4.1 IO
The IO screen is used to control input and output alarms and messages, which are generated when an
event is recognized by the system.
IO Screen
Alarm Switch
The Administrator can select from the following options:
·
Select Off to disable an alarm.
·
Select On to enable an alarm (default setting).
·
Select By Schedule to set a schedule. Then click Please Select to select up to 10 schedules from
the drop-down list that opens. The selected schedules are displayed in the Please Select text box.
To set a schedule, open the Schedule tab.
Click SAVE after configuring the settings.
Alarm Type
Select an alarm type ( Normal close or Normal open ) that corresponds to the alarm application. Normal
open is the default setting. Click SAVE after configuring the settings.
Alarm Output
Define the normal alarm output signal as Output high or Output low , according to the current alarm
application. Output high is the default setting. Click SAVE after configuring the settings.