FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 124 / 146

September 6, 2017 118
Configuration and Operation
CM-6212 H1-I User and Installation Guide
IR LED Illuminator
This setting is used in low-light conditions or at night. IR LED lights are turned On or Off , depending on the
light sensor. The default mode is Auto. Two settings are available:
·
Auto – The light sensor operates automatically.
·
Off – The IR light is always off.
Click SET to confirm the new setting.
Day/Night Threshold
Set the threshold at which you want to activate the IR function:
·
For the daytime to nighttime threshold, from the upper drop-down list, select a number between 1-
9, where 1 is darker and 9 is brighter.
·
For the nighttime to daytime threshold, from the upper drop-down list, select a number between 1-
9, where 1 is darker and 9 is brighter.
Click SET to confirm the new setting.
IR Compensation
From the drop-down list, set the IR Compensation to On or Off . Setting IR Compensation to On
compensates for the reflection of infrared light emitted from the camera onto reflective objects, thus
improving image sharpness and definition. Without IR compensation, objects may appear blurred. IR
Compensation is enabled by default.
Click SET to confirm the new setting.
9.5.5 Misc. Screen
From the Misc. (Miscellaneous) tab you can set the TV system.
Camera > Miscellaneous Screen