FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 140 / 146

September 6, 2017 134
Appendices
CM-6212 H1-I User and Installation Guide
10.6 Network Settings
Following are the network protocols and ports used by the camera:
Protocol Port Usage
FTP 21 Uploading files to the FTP server
HTTP 80 Sending commands, requests, replies and notifications
HTTPS 443
Using the secure socket protocols SSL/TLS over HTTP. HTTPS
must be enabled if your network uses SNMPv3.
Multicast Streaming
As
defined in
the units
Video/streaming (multicast). Uses the ONVIF address defined by
the Video Management System
Multicast UDP 9766 Unit self-publishing. Uses IP address 224.9.9.9
NTP 123 Time synchronization with a network time server using SNTP
RTSP 554 RTP session setup
RTP
2000 to
65535
Multimedia streaming
SNMP 161 IP management system
SNMP Trap port 162
Sending alarm event and exception messages to the surveillance
center