FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 62 / 146

September 6, 2017 56
Configuration and Operation
CM-6212 H1-I User and Installation Guide
General
Select one of the following options in the General area for configuring network settings:
·
Get IP address automatically
·
Use fixed IP address
·
User PPPoE
Get IP address automatically
If you select Get IP address automatically , you can use the DNA utility, which is provided in the supplied
CD, to obtain the IP address from a DHCP server on the network. See Using the DNA Utility to Search and
Access the Camera .
Note:
For future reference, record the camera’s MAC address, which is found on the camera label.
Use fixed IP address
The camera’s default setting is Use fixed IP address . Refer to Using the DNA Utility to Search and Access
the Camera for login with the default IP address. You may use DNA or enter the IP address in your Internet
browser’s URL address bar.
To set up a new static IP address
1. Select the Use fixed IP address option.
2. Enter the following information:
·
IP address – The IP address is necessary for network identification.
·
Subnet mask – Used to determine if the destination is in the same subnet. The default value
is 255.255.255.0.
·
Default gateway – Used to forward frames to destinations in a different subnet. An invalid
gateway setting causes transmission to destinations in other subnets to fail.
·
Primary DNS – The primary domain name server that translates host names into IP
addresses.
·
Secondary DNS – A secondary domain name server that backs up the primary DNS.
To use PPPoE
1. Enter your PPPoE user name and password into the respective fields.
2. Click SAVE to confirm the settings.