FLIR identiFINDER R200 Manual Download Page 97

Page: 97 / 130

8.2 Charging the FLIR identiFINDER R200

8.2 Charging the FLIR identiFINDER R200

Charge the battery by connecting the FLIR identiFINDER R200 to an external power source.

Connect to Wall Outlet via the Adapter

-or-

Connect the FLIR identiFINDER R200 to a computer via the USB cable.

If the R200 has been used or stored at temperatures above 105°F (40°C), allow the instrument to cool

before charging the batteries.

Observe the Power Indicator

If using the FLIR identiFINDER R200 while charging, monitor the indicator and disconnect when fully

charged.

8.2.1 Charging Durations

Shortest charging durations are achieved with:

the FLIR identiFINDER R200 switched off, and,

the FLIR identiFINDER R200 connected to the wall mounted power supply shipped with the FLIR

identiFINDER R200.

Batteries:

Type

Capacity:

Operating

Duration

Charging

Duration

1) Internal Li-Ion re-chargeable

> 10 Wh; 3.6v 37 h at 20 °C

≥

6h at 0 °C or deep

discharge

2) COTS: CR124a, Li primary cell

~1.5Ah; 3V

16h at 20°C

N/A

Charging Specifications for the FLIR identiFINDER R200

R200 3/10/2017

1:38 PM

8–90

Summary of Contents for identiFINDER R200



































































































































Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands

FLIR identiFINDER R200, Manual

Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands