FLIR identiFINDER R200 Manual Download Page 56

Page: 56 / 130

Chapter 3

Field Operating Guide

Figure 3-1 Startup FLIR logo screen displays

followed by this "Initializing..." screen while

firmware loads into memory (initializes). Note

the information displayed.

3.1 Powering On/Off and Checking the

Instrument

This description assumes normal operation of the instrument. For a

detailed description of the startup process, refer to "Startup" on

page 46.

To start up the FLIR identiFINDER R200*

1. Press and hold the power button

for a moment until the splash

screen displays.

2. Release the key. Wait a moment while the following

processes of the FLIR identiFINDER R200 complete:

the start-up routine,

firmware initialization (loading it to system memory),

and display of the "Dose Rate" screen .

3. Verify that enough energy is charged in the battery, and memory

is available.

4. The FLIR identiFINDER R200 displays the "Dose Rate" screen in

the initial state.

5. The FLIR identiFINDER R200 is now ready for operation.

Turn the detector off by pressing and holding the power button until the

confirmation screen displays, which provides the choice of affirming or

canceling the shutdown command.

The LED Status Indicator (green LED, top left of the detector) will flash

in five second intervals indicating normal operations.

the LED Status Indicator flashes at intervals more frequently than every five seconds, this is an indicator of

a system error. Holding the Power button (about 15 seconds) will re-boot the detector, and clear the system

error.

3 - 49

R200 3/10/2017

1:38 PM

Summary of Contents for identiFINDER R200



































































































































Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands

FLIR identiFINDER R200, Manual

Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands