FLIR identiFINDER R200 Manual Download Page 13

Page: 13 / 130

1.2 Safety Warnings

1.2 Safety Warnings

The FLIR identiFINDER R200 is designed for indoor and outdoor use. When operated in accordance

with the operating instructions, it should not present any hazard to the operator.

The housing is essential to the integrity and safe operation of the instrument. Under no cir-

cumstances should the housing be tampered with, penetrated, or otherwise removed except

for normal access to the external connectors (see chapter 7).

The FLIR identiFINDER R200 is not certified for use in explosive environments.

The power adapter is connected to line power. Normal care in handling such a line power

device should be exercised. In particular this unit should not be connected to line power if it is

wet.

The nature of the application is such that objects being surveyed with the FLIR identiFINDER

R200 could emit radioactive radiation with hazardous intensity.

R200 3/10/2017

1:38 PM

1–6

Summary of Contents for identiFINDER R200



































































































































Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands

FLIR identiFINDER R200, Manual

Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands