FLIR identiFINDER R200 Manual Download Page 38

Page: 38 / 130

Device

Device

Menu

Definitions

Access the menus by selecting the "Menu" icon.

Setting Time

and Timezone

After selecting the "Menu" icon, the screen at left displays with the "Device" button

highlighted. Scroll down the list using the "Down" icon

, or select "Device"

by pushing the middle button (corresponding to the checkmark

The following screen displays when the

middle button (corresponding to the checkmark) is pushed—

if "Set Time" is selected, change these to current date/time -

If "Timezone" is selected, scroll to and set.

Time and

timezone must be properly set in order for the FLIR identiFINDER R200 to operate

correctly. the timezone where the R200 will operate.

"Device" Menu

R200 3/10/2017

1:38 PM

2–31

Summary of Contents for identiFINDER R200



































































































































Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands

FLIR identiFINDER R200, Manual

Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands