FLIR identiFINDER R200 Manual Download Page 44

Page: 44 / 130

Radiation

Radiation

Definitions

Access the menus by selecting the "Menu" icon.

The "Radiation" menu command displays screens for "ID

Settings" and "Auto Mode".

"Auto Mode" is used with an unattended

instrument to identify radiating nuclides

in keeping with Dose Rate settings and Alarms.

Radiation / ID Options

1. Results

Confidence ("On", or "Off"

Severity ("On", or "Off")

Usage ("On", or "Off")

2. Dynamic

Dynamic ("On", or "Off") - changes ID counts

to a percentage of id counts, instead of being

expressed in time.

3. Auto Mode

Set this to "On", or "Off".

4. Int. Time(s)

(set to numeric value; for interval).

5. Ex. Time(s)

(set to numeric value; for interval).

Radiation / Dose Rate

Int. Times (set to numeric value; for interval).

"Radiation" Menu

R200 3/10/2017

1:38 PM

2–37

Summary of Contents for identiFINDER R200



































































































































Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands

FLIR identiFINDER R200, Manual

Search results

Summary of Contents for identiFINDER R200

Reviews:

Brands by name

Popular brands