FLIR identiFINDER R200, Manual

Page: 83 / 130

6.3 Preparing the USB Network Connection on a Computer
6.3 Preparing the USB Network Connection on a Computer
The FLIR identiFINDER R200 is designed to work with Microsoft Windows 7 and later.
If the FLIR identiFINDER R200 is NOT set to MSD (Mass Storage Device) mode, then connect to a com-
puter and communications may be established with the detector by typing "r200.flir" into the address bar
of the user's preferred browser (Mozilla Firefox®, Google Chrome®, or Microsoft Internet Explorer (IE)
11®, or above).
Some computers may be configured (e.g., security, access privilege, etc.) in a manner in which
USB drivers do not load, or load improperly and will require technical support.
Drivers for the FLIR identiFINDER R200 are supplied on the USB thumb drive (memory
stick) included, or may be obtained at http://www.Detectionsupport.com/radiation .
6.4 Using the Network Connection
Please take note of the serial number printed on the back of the detector. It is sometimes
used to identify the FLIR identiFINDER R200 in a computer network. This is also useful for
user's requiring customer support from FLIR.
Networking is accomplished by a physical connection using the USB cable , or by pairing the FLIR
identiFINDER R200 with other devices using Bluetooth .
R200 3/10/2017 __ 1:38 PM 6–76