FLIR identiFINDER R200, Manual

Page: 59 / 130

3.4 Identification
The FLIR identiFINDER R200 averages the count rate for
adjustable intervals and displays guides to the source, and the
visual / audible / tactile alarms flash, sound and/or vibrate indic-
ating the distance to the source and consistent with user con-
figuration.
The closer the distance between the source and the detector,
the shorter the pause between annunciation, and the faster the
sequence of beeps, vibrations and flashes.
Figure 3-4 Diagram of Finder mode screen elements
are announced): visual, auditory, tactile.
Figure 3-6 From "Dose Rate" (home) screen, press
the right thumbpad button to select the menu tree
; then navigate to "Indicators"
Using the sensory inputs for sight (detector display, or the flashing light),
sound or vibration, move the detector throughout the area to zero in on
(discover) source location using annunciation alarms as guide to the
source.
Alarms may be configured by navigating to "Menu" ,
"Device" , "Indicators" .
Remember to remain always cognizant and aware of the
surroundings if relying on visual alarms. The beeper and
vibration alarms allow free movement through the environment, or area of operation, while main-
taining eyes on path / subject.
3.4 Identification
Once a radiation source is detected and located, use the FLIR identiFINDER R200 in "Identify" mode to
determine the nuclide(s) that are present.
The spectrum of the unknown nuclide (sampled in the
Figure 3-7 The "Identify" display with
Magic Eye.
R200 3/10/2017 __ 1:38 PM 3–52