UMPIOXR400V2-7-1EN, 2012-07-01
53
12 Measurement
If a program code is active, the message
PROGRAM CODE ACTIVE
will be displayed when a key is pressed. The
message will disappear after a few seconds.
12.4.1 Activation of a Program Code
12.4.2 Interruption of Measurement
If a program code was defined, it will be requested as soon as there is an intervention in the measurement (a com-
mand or key BRK).
12.4.3 Deactivation of the Program Code
Note!
Do not forget the program code!
Select in the program branch
SPECIAL FUNCTION
the menu item
SET PROGRAM CODE
.
Select
YES
to enter a program code.
Enter a program code with max. 6 digits. Press ENTER.
An error message will be displayed if a reserved number has been
entered (e.g. a HotCode).
A program code remains valid as long as no other valid program code
is entered or the program code is not deactivated.
Enter the program code. Press ENTER.
The input of the program code will be stopped and the measurement
continued by pressing key
.
At first
000000
will be displayed. If the program code starts with
000
, ENTER can be pressed directly if
the
ACCESS
code
is requested.
If the entered program code is not valid, an error message will be dis-
played for a few seconds. If the entered program code is valid, the
command will be executed or the measurement will be interrupted.
The program code will be deleted by entering "
------
". Press
ENTER.
Note!
If the character "
-
" is entered less than six times, this character string will be used as new pro-
gram code.
S p e c i a l F u n c t .
S e t p r o g r a m c o d e
P r o g r a m c o d e
n o > Y E S <
P r o g r a m c o d e
- - - - - -
P r o g r a m c o d e
I N V A L I D C O D E !
I N P U T B R E A K _ C O D E
C O D E : 0 0 0 0 0 0
C
I N P U T B R E A K _ C O D E
I N V A L I D C O D E
P r o g r a m c o d e
- - - - - -
