46
UMPIOXR400V2-7-1EN, 2012-07-01
11 Output Options
11 Output Options
If analog outputs or the serial output are configured, they have to be activated in program branch
OUTPUT
OPTIONS
. The status outputs also will be configured in this program branch
.
In the program branch
OUTPUT OPTIONS
:
•
the damping factor of the measured values will be defined
•
the installed inputs and outputs will be activated
•
alarms will be defined and activated
•
the serial output of the measured values will be activated
11.1 Damping Factor
Each displayed measured value is the floating average of all measured values of the last x seconds, where x is the
damping factor.
A damping factor of 1 s means that the measured values are not averaged as the measuring rate is approx. 1/s.
The default value is 10 s. This is appropriate for normal measuring conditions.
Strongly fluctuating readings caused by high dynamics require a larger damping factor.
11.2 Activation of the Serial Output
11.3 Activation of the Outputs
The activation displays of all the configured outputs will now be displayed one after another. The configuration of
the outputs is described in chapter 9.
Three values relating the measured values to the output values (current, voltage, frequency) have to be entered.
Select the program branch
OUTPUT OPTIONS
. Press ENTER.
Select the channel for which the output options are to be set.
This display will not be indicated if the transmitter has only one mea-
suring channel.
Enter the damping factor. Values between 1 s and 100 s will be
accepted. Press ENTER.
If the serial output has been configured in program branch
SPECIAL
FUNCTION, SERIAL OUTPUT
will be displayed now. The installation
of the serial output is described in chapter 10.
Select
YES
to activate the output of the measured values to the serial
interface,
NO
to deactivate it. Press ENTER.
Select
YES
to activate the specified output,
NO
to deactivate it. Press
ENTER.
p a r m e a > O P T < s f
O u t p u t O p t i o n s
O u t p u t O p t i o n s
f o r C h a n n e l A :
D a m p i n g
1 0 s
S e r i a l O u t p u t
n o > Y E S <
C u r r e n t L o o p
I 1 : n o > Y E S <
