30
UMPIOXR400V2-7-1EN, 2012-07-01
7 Start-Up
7 Start-Up
The command panel of PIOX R400 consists of the keyboard and a 2 x 16-digit LCD display.
7.1 Keyboard
The keyboard has 3 function keys and 12 keys for numerical data input. Several keys have double functions. They
can be used for data entry and for navigation through the scroll list.
In selection mode, for example, the arrow-shaped numerical keys are used as cursor keys. In input mode, they are
used for the input of numbers and characters.
The key functions are explained in Tab. 7.1 to Tab. 7.4.
PIOX R400 will be switched on by connecting the power supply. The
main menu is displayed after the initialization.
Note!
No data can be entered while the serial number is displayed.
Tab. 7.1: General functions
INIT (cold start): Most parameters and settings are reset to the factory default
values. The data memory will not be cleared.
Press these two keys simultaneously while switching on the instrument until the
main menu is displayed.
During the measurement a cold start can be performed:
•
Press the keys BRK, C and ENTER simultaneously.
•
Release only key ENTER. The transmitter will be restarted.
•
Keep the keys BRK and C pressed until the main menu is displayed.
RESET: Press these three keys simultaneously to recover from an error. The
reset has the same effect as restarting the transmitter. Stored data will not be
affected.
> P A R < m e a o p t s f
P a r a m e t e r
2x16-digit LCD
display
8
2
0
5
7
N E X T
1
M U X
9
D I S P
3
D I S P
L F
E N T E R
L I G H T
R E S E T
I N I T
B R K
3 x O F F
C
O N
6
4
keyboard
Fig. 7.1: Command panel of transmitter PIOX TR374
I N I T
B R K
C
E N T E R
R E S T A R T
I N I T
B R K
C
