FlavorShot AC-FS5, Service Manual

Page: 9 / 56

9
product dispensing block, with no kinks or pinches. Do not pull or stretch
the flavor delivery tube.
TO PRIME TANK PUMP:
8. Prime the pump.
As the pumps are being primed, the dispenser will automatically track the
amount of flavor removed from the tank.
To Prime individual tank:
1. place empty cup or container under the product dispense block
2. press the individual flavor button
3. press the PRIME button and hold for 2 seconds. The PRIME button is
located at the bottom right of the button panel.
You must let the Prime cycle complete without interference to ensure
all the air is removed from the pump assembly.
Note:
The PRIME function automatically tracks the amount of flavor
removed from the tank.
There is no need to refill the tank after priming it.
If you choose to refill the tank, you must reset the level, following
the procedure in the “Reset” section
9. Close the dispenser door. The dispenser is now ready to operate.