FlavorShot AC-FS5, Service Manual

Page: 10 / 56

10
TO REFILL & RESET FLAVOR TANKS
To Refill Tank, when product is low
When the product in a flavor tank reaches the “low” level, the red indicator
light at the top of the Flavor button will flash to show that it is time to refill the
tank. When the flashing begins, approximately 200 ml of flavor remain in the
tank. Once the Indicator Light begins to flash, the tank can be refilled with a 750
ml bottle of flavor.
When approximately 100 ml of flavor are left in the tank, the Indicator Light
will turn to solid red, to indicate that the tank must be refilled and reset before
dispensing can continue.
When a product tank has been refilled, the tank level must be reset to
begin the countdown to the low level indication. Refill must be followed by Reset.
To Reset, see page 11.
TO REFILL:
1. Open the dispenser door.
2. Slide the tank shelf forward.
3. Remove the tank cap and refill the tank with the appropriate flavor to the
“Full” or “Low” line on the tank.
If you refill the tank to the
“Full” level:
a. Press the Flavor button for the tank filled
b. Press the Reset button.
The LCD will display “Reset - Full” or “Reset - Low Fill”.
Press the Reset button until
“Reset - Full” is displayed.
•
The FlavorShot by SureShot™
offers convenient reset levels
so that, depending on product
requirements or sales demand,
you can either fill the tank fully
or just to the low level
indicator.
•
Flavor tanks hold one full
bottle of flavoring when the
tank has reached the “low
level” indicator, to enable fast
reloading and resetting of the
dispenser.
•
Dispensers must be refilled to
either the Reset-Full or Reset-
Low Fill levels. Refilling to any
other level in the tank will
result in inaccurate readings
by the Low Level Indicator.