PROBLEM
PROBABLE CAUSE
SOLUTION
No sound
Channel switches not on same setting
Set channel switch on transmitter and receiver to the
same
channel.
Signal interference due to monitors,
Change the channel setting on
both
the transmitter and the
cordless telephones, etc.
receiver.
Identify and eliminate the source of interference.
Test reception by moving the transmitter and/or receiver to
different locations throughout the house. Relocate the transmitter
and/or receiver.
Out of range or insufficient signal
Test reception by moving the transmitter and/or receiver to
different locations throughout the house. Relocate the transmitter
and/or receiver.
Volume not turned up
Adjust volume on receiver.
Improper antenna position
Make sure the antenna on the transmitter and receiver are
pointing upward.
Weak or dead batteries
Replace the battery in the receiver with a fresh 9V alkaline battery,
and the batteries in the transmitter with four size “C” alkaline
batteries or use the AC adaptors.
AC adaptor not properly connected
Check AC adaptor jack-to-socket and plug-to-outlet connections.
Interference
Signal interference due to another
Change channel switch on
both
transmitter and receiver to the
(buzzing, static, etc.)
nursery monitor or cordless
other channel.
and signal indicator on
telephone, etc.
receiver is “ON”
Channel switches not on same setting
Check channel switch on transmitter and receiver to be sure they
are on the same channel.
Interference
Signal interference due to other
Change channel switch on
both
transmitter and receiver to the
(buzzing, static, etc.)
nursery monitors or cordless
other channel.
and signal indicator on
telephones, etc.
receiver is “OFF”
Identify and eliminate source of interference. Do not use more
than one transmitter at the same time in the same house.
Channel switches not on same
Check channel switch on transmitter and receiver to be sure they
setting
are on the same channel.
Receiver power is “ON” but
Make sure transmitter power is “ON”.The power indicator should
transmitter power is “OFF”
be lit.
Code switches in receiver and
Reset code switches in receiver and transmitter so that they
transmitter do not match
match.
Interference
Signal interference due to another
Make sure transmitter power is “ON”.
(garbled voices) and
Fisher-Price
®
Direct Link Privacy
signal indicator on
Monitor
TM
Change channel switch on
both
transmitter and receiver to
receiver is “ON”
the other channel.
We recommend “Checking Privacy” periodically. See page 9.
Feedback
Receiver is too close to the transmitter
Move receiver further from transmitter.
(squealing or whistling)
Volume is set too high
Lower volume on the receiver.
All five bars on the
Out of range or insufficient signal
Move the receiver closer to the transmitter.
receiver variable lights
display light (and you
Channel switches not on same
Check channel switches on transmitter and receiver to be sure
hear static)
setting
they are on the same channel.
e
e
Problems and Solutions Guide
f
Guide de dépannage
S
Guía de Problemas y Soluciones
15
L
