30
THE MAIN STATUS MENU
Note
: HELP
text information for many main menu functions is displayed when you press the Fireye
logo. The text will appear in the display for 3 seconds. If there are multiple lines of help information
available, it will appear on sequential screens.
The first display in the Main Status Menu shows Flame ON/OFF status and the File selected (F=x)
on the first line. The Flame Quality (FQ= xxx) for each of the two (2) flame relays is shown on the
second line.
Flame ON/OFF
This item refers to the energized / de-energized status of the internal flame relays (FR1, FR2). 1=ON
or 2=ON is displayed when the flame quality rises above the On Threshold set in the Config Menu.
When the flame quality drops below the relay Off Threshold, 1=OFF or 2=OFF will be displayed.
File Selected
(F=x) displays the current running file. Four file choices are available (A, B, C, D).
Flame Quality
The “Flame Quality” number (FQ 1:xxx 2:xxx) for FR1 and FR2 can range from 0 to 100. The
“Flame Quality” number is determined by the input sum of the IR and/or UV sensors. This sensor
signal strength value can be viewed in the Main menu as “FQ 1:xxx 2:xxx”, see description below.
For clarity, the “Flame Quality” number is capped at 100, while under certain firing conditions, the
sum of IR or UV signal strength may normally exceed 100 (maximum of 999).
In normal burner operation after the scanner has been properly setup, “FQ 100” will be displayed
with occasional movement depending on the stability of the flame.
Important Note: The Flame Quality number is the Flame Signal number, but is capped at 100. It
is the sum of the IR + UV Signal Strength numbers, assuming both sensors are used, but the sum
is capped at 100.
Date/Time
The current Date and Time of day is displayed. If the scanner is powered off for more than 36 hours,
this information will revert to system default values (Jan. 1, 2010) and the current Date and Time
must be re-entered.
File Select Method
The Remote File Select option, KEY, LINE, COMM is displayed on this screen. (FS:KEY) indicates
that the file selection can be made only via the Key Pad. (FS:COMM) indicates the file selection can
be made only via an external computer running Fireye software, and (FS:LINE) indicates the file
selection can be made only via an external switch or relay.
Maximum Temp
(MAX TEMP) This displays the highest internal scanner temperature recorded. This value toggles
between degrees Fahrenheit and Celsius.
