Fire Sense AFP-2800, Operation And Installation Manual

Page: 18 / 158

System Capacity And Expandability
6 S
YSTEM
C
APACITY
A
ND
E
XPANDABILITY
6.1 B
ASE
S
YSTEM
Item Description Notes
Communications Ring RS485 communications ring to support
Up to 100 Field Modules
Up to 50 Annunciators
8 System Outputs 4 x Monitored Outputs. Fault output is normally

Bell Output energised using V5.00

3 Additional and above firmware.
programmable outputs
4 x Clean contact relays Max contact rating of all

General Alarm Output relays 1A @ 30Vdc.

General Fault Output

2 x programmable outputs

Power Supply 2.6 A power supply and battery A larger power supply
charger may be required if total
Fused 27.3Vdc outputs module load exceeds
2A. Power supplies up
to 11.7A are available.
2 LOCAL
AZF’S
AZF 1
AZF 2
2 RS232 communication Laptop interface
ports
System event printer
Remote terminal mode
Keyboard Interface PS2 QWERTY IBM PC keyboard
System Memory Approx. 4300 Named points
Approx. 4000 Control scripts
4000 History events
6.2 E
XPANSION
PCB
S
Item Description Notes
Loop Interface Module Interface module to communicate with Each Analog
(LIM) up to 5 x pairs of Notifier LCM/LEM addressable loop
modules. I.e. total of 10 FlashScan supports up to 159
Analog addressable loops for AFP- detectors and 159
2800 and a total of 4 CLIP Analog addressable modules
addressable loops for the AFP-2802. using the Notifier
FlashScan protocol or
99 detectors and 99
modules using the CLIP
protocol.
Network Interface Interface module to communicate with AFP-2800 only.
Module (NIM) the Network Control Module (NCM) AFP-2802 does not
support Networking.
Panel Expansion Relays Relay card with 8 relays
– contact
Up to 8 IFS-803/IFS-717
(IFS803 or IFS-717) rating is 1A @ 24Vdc 8-way relay boards can
be added
AFP-2800/2802 Manual
– P/N DOC-01-011
18