manualshive.com logo in svg

Fire-Lite Alarms MS-9200UD, Manual

The Fire-Lite Alarms MS-9200UD is a reliable and versatile fire alarm control panel that ensures utmost safety in any establishment. With its user-friendly design, configuring and operating the system is hassle-free. Download the free user manual from manualshive.com to effortlessly set up and maintain your fire alarm system.

Share
Download
background image

$FFHVVRULHV

3URGXFW'HVFULSWLRQ

068'31$

1.8.5  Annunciators

ACM Series LED Zone Type Annunciators

The ACM Series Annunciators remotely display alarm and trouble status as well as 
system status.  In addition, they can provide remote Acknowledge, Silence, Reset and 
Drill functions.  For more detailed information, refer to the appropriate annunciator 
manual.  Following is a list of annunciators which can be used with the MS-9200UD.

•

ACM-16ATF

 Annunciator Control Module annunciates 16 zones with 16 red 

alarm LEDs and 16 yellow trouble LEDs.  In addition, it has a System Trouble 
LED, an On Line/Power LED and a local piezo sounder.  It also has switches for 

FACP Acknowledge, Silence, Reset and Drill.  It has rotary address switches and 

will accept up to three AEM-16ATF Expanders.  

•

AEM-16ATF

 Annunciator Expander Module annunciates 16 zones with 16 red 

alarm LEDs and 16 yellow trouble LEDs

•

AFM-16ATF

 Annunciator Fixed Module annunciates 16 zones with 16 red 

alarm LEDs and 16 yellow trouble LEDs.  In addition, it has a System Trouble 

LED, an On Line/Power LED and a local piezo sounder.  It also has switches for 

FACP Acknowledge, Silence, Reset and Drill.  It is fixed at address ‘1.’  

•

ACM-32AF

 Annunciator Control Module annunciates 32 alarm zones with 32 

red LEDs.  In addition, it has a System Trouble LED, an On Line/Power LED 

and a local piezo sounder.  It also has a switch for local piezo silence.  It has 
rotary address switches and will accept one AEM-32AF Expander.  

•

AEM-32AF

 Annunciator Expander Module annunciates 32 alarm zones with 32 

red LEDs

•

AFM-16AF

 Annunciator Fixed Module annunciates 16 alarm zones with 16 red 

alarm LEDs.  In addition, it has a System Trouble LED, an On Line/Power LED 

and a local piezo sounder.  It also has a switch for local piezo silence.  It is fixed 
at address ‘1.’  

•

AFM-32AF

 Annunciator Fixed Module annunciates 32 alarm zones with 32 red 

LEDs.  

Reference

Manual

Summary of Contents for MS-9200UD

































































































































































































Reviews:

No comments

Related manuals for MS-9200UD

Balboa GL Series User Manual preview
GL Series
Brand: Balboa Pages: 12
Paoli F1 Operating And Maintenance Manual preview
F1
Brand: Paoli Pages: 16
EA SV Series Original Operating Manual preview
SV Series
Brand: EA Pages: 24
Abus FUMO50110 Quick Manual preview
FUMO50110
Brand: Abus Pages: 12
Fairchild 1600A Installation, Operation And Maintenance Instructions preview
1600A
Brand: Fairchild Pages: 2
Fairford synergy User Manual preview
synergy
Brand: Fairford Pages: 233
Zeagle Razor Service Manual preview
Razor
Brand: Zeagle Pages: 37
Nedap WIM Installation Manual preview
WIM
Brand: Nedap Pages: 20
Vacon 100X series Installation, Technical And Maintenance Manual preview
100X series
Brand: Vacon Pages: 132
V2 WES-EASY Manual preview
WES-EASY
Brand: V2 Pages: 48
Sabiana QCV-MB Manual preview
QCV-MB
Brand: Sabiana Pages: 60
LAB-EL LB-762 Installation Manual preview
LB-762
Brand: LAB-EL Pages: 25
Cardigo 62323 Instruction Manual preview
62323
Brand: Cardigo Pages: 12
Wenglor SR4B3B01S Operating Instructions Manual preview
SR4B3B01S
Brand: Wenglor Pages: 44
Intermatic T30000R SERIES Installation, Operation & Service Manual preview
T30000R SERIES
Brand: Intermatic Pages: 3
ISVT IVC3100 Instruction Manual preview
IVC3100
Brand: ISVT Pages: 78
Linear Technology LT8610A Demo Manual preview
LT8610A
Brand: Linear Technology Pages: 8
Precision PW66 User Manual preview
PW66
Brand: Precision Pages: 8

Brands by name

Popular brands

Load more brands