GENERAL INFORMATION
I115SS
Rev. 001
22/12/2014
5/58
failure to observe the instructions contained in this manual;
tampering or alterations introduced without FIORENTINI’s specific approval;
use of non-original spare parts;
wear parts e.g. brushes, squeegee blades etc.
For installed electrical parts and commercially available parts, FIORENTINI S.r.l. will extend to purchasers
the same warranty terms granted to FIORENTINI itself by the parts' suppliers.
WARRANTY VALIDITY
The Ing.O.Fiorentini S.p.A. general terms conditions also apply to the warranty.
The manufacturer cannot be held responsible in any way for damages resulting from unauthorised
modifications made to the appliance, from the use of unsuitable brushes and accessories and after use of
the device other than that intended.
EXCLUSIONS
The warranty will not cover materials and components exposed to normal wear (brushes, squeegee blades
etc.) and those whose working life cannot be established beforehand.
WARRANTY APPLICATION TERMS
Defective components must be returned to FIORENTINI S.p.a. in order to establish the causes of any
observed defects and determine warranty applicability. Repairing and replacement under the warranty will be
carried out on FIORENTINI’s premises, by subcontractors or on customer's premises. For services under the
warranty to be carried out on customer premises, power supply and any equipment that might be necessary
for repairing purposes will have to be provided by the customer.
PRODUCT RETURNS
In case of parts to be returned for replacement or repairs under the warranty, a written authorisation must be
obtained in advance from FIORENTINI's Technical Assistance Department.
All defective parts must be carefully repacked in order to avoid damages during transport. Products must be
returned on a free-on-board basis, complete with:
the serial number read from the equipment ID plate (see point 2.1);
the item code and installation position of the returned parts, read from the spare part list (see point 7.2);
a detailed description of the observed defect and conditions under which it became apparent;
In case of defective electric or electronic components,
please return the parts separately from other materials,
so that waste
containing dangerous substances can be separated and
Waste Electrical and Electronic Equipment (WEEE) can be
recycled according to the 2002/96/EC Directive.
A missing machine data plate will imply the immediate loss of any warranty rights.
1.5. DECLARATION OF CONFORMITY
The Declaration of Conformity is supplied with the purchased machine and the use and maintenance
manual.
