MAINTENANCE
I115SS
Rev. 001
22/12/2014
31/58
4.7.4 OPERATOR WORKSTATION CONTROLS
The controls available at the operator's workstation are:
Accelerator pedal
(detail 1 figure 4.10): by depressing the front end of the pedal with your foot you
will control the forward travelling direction, while by depressing the rear end of the pedal you will
reverse the machine.
Parking brake
(detail 2 figure 4.10): see paragraph
3.6
.
Service brake
(detail 3 figure 4.10): by pressing the pedal the machine will stop, by releasing it
normal operation will be resumed. It is a hydraulic-type brake with an oil tank located below the front
dashboard (detail 4 figure 4.10).
Solution water lever
(detail 5 figure 4.10): by following the instructions in the data plate next to the
lever, the solution water tap can be turned on or off.
4
1
2
5
3
FIGURE 4.10
