MAINTENANCE
I115SS
Rev. 001
22/12/2014
51/58
5.4 SUCTION MOTOR AND RECOVERY TANK FLOAT MAINTENANCE
The suction motor should be regularly checked and cleaned every six months; the brushes should be
checked and replaced, too - if necessary.
Suction motor maintenance should be carried out as follows:
after removing the key from the dashboard, lift the motor cover by loosening the two knobs on
the sides (detail 1 figure 5.5);
unplug the connector plug (detail 2 figure 5.5.)
unscrew the knob locking the bracket against the two motors (detail 3 figure 5.5);
remove the motors and check brush wear (detail 4 figure 5.5);
release the sponge filter below the motor; the filter can then be removed, washed and then
replaced;
through the suction motor front hole, check the suction fan.
To reassemble, reverse the order of the above operations.
3
FIGURE 5.5
