MAINTENANCE
I115SS
Rev. 001
22/12/2014
38/58
Side brush adjustment:
There are three possible adjustments: the height, the opening angle to the outside (caused by impact against
an object) and the pressure applied to the floor.
by loosening the rounded screw on the brush shaft plate, the steel cable height is adjusted (fig.4.23).
by screwing in or out the hex screw (detail 1 fig.4.24) the hydraulic motor support opening angle is
adjusted;
by screwing in or out the hex screw (detail 2 fig.4.24) the pressure applied to the floor is adjusted.
To ensure a correct working pressure, the side brushes must be in contact with the floor to
half-way up the bristles (see fig.4.25)
FIGURE 4.23
FIGURE 4.24
1
2
FIGURE 4.25
