MAINTENANCE
I115SS
Rev. 001
22/12/2014
34/58
Solution water draining:
a solution draining tap is provided in the bottom left corner below the solution tank
(detail 1 figure 4.13):
park the machine near a sewer hole;
turn on the tap ensuring that water does not fall on the squeegee to avoid splashing;
turn off the tap again.
Solution cone filter cleaning:
the solution cone filter is located in the right rear part of the frame:
remove the key from the dashboard to prevent unwanted ignition and close back the solution tap with
the special lever;
from behind the machine, bend down and reach out with your hand to grasp the filter (figure 4.14);
screw out the transparent guard and remove the filter;
clean it and replace it locking it with its guard.
FIGURE 4.13
FIGURE 4.14
