MACHINE FEATURES AND TECHNICAL DATA
I115SS
Rev. 001
22/12/2014
8/58
The machine uses the two side rotating brushes (left side, clockwise rotation - right side, anti-clockwise
rotation) to convey any dirt towards the centre of the machine, where a roller brush rotating in the opposite
direction to the machine's direction of movement will push any collected residues into the the collection tank.
A vacuum system powered by the electric motor installed on top of the waste box is designed to take in by
suction and deliver to the waste box the finer particles that cannot be trapped by the panel filter. During the
sweeping process, the scrubbing brushes can be operated simultaneously to scrub the floor with water and
detergent. During machine forward travelling, the squeegee, in contact with the floor, takes up any water by
suction for its subsequent delivery to the recovery tank.
Important: remember to actuate the fine particle filter shaking motor to clean the particle
filter. This should be done with an open bucket next to the emptying area.
All machine functions can be controlled via controls located on the instrument panel and designed for
immediate actuation.
Through the control panel, all the main machine functions can be activated:
control the side brushes and centre brush of the sweeping unit;
start the sweeping unit suction system;
lift and lower the waste box;
close and open the flap;
control the filter shaking motor;
control the parking brake lever;
lift and lower the scrubbing brush plate;
control the scrubbing brush plate sideways movement;
start the scrubbing brushes;
regulate the water delivery flow;
start the suction motor;
start the squeegee up/down stroke;
select the forward or backward travelling direction;
turn the machine on and off;
turn the flashing light on and off;
turn the headlights on and off.
