Fimar TS1, Use And Maintenance

Page: 42 / 154

HEAT SEALERS
346-
075-0.
fm
ID
M
- 20 - English language
TSAVG
EN
TROUBLESHOOTING
The purpose of the following information is to help the operator to identify and correct any
anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abilities
and must only be performed by qualified personnel with recognised experience in the spe-
cific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 3: Operating malfunctions
Problem Causes Solutions
The equipment does not start.
Main switch off. Turn on main switch.
No mains power.
Contact your dealer or authorised
service centre.
Fuse burnt-out. Contact customer service.
The message "TEMPERATURE
NOT REACHED" appears on the
display.
Operating temperature too low
Wait for the appliance to reach the
set operating temperature.
The message "AIR PRESSURE
INSUFFICIENT" appears on the
display.
Air supply pressure too low Contact customer service.
The message "GAS PRESSURE
INSUFFICIENT" appears on the
display.
Inert gas supply pressure too low Contact customer service.
The message "VACUUM SENSOR
NO ZERO" appears on the display.
Vacuum sensor faulty Contact customer service.