Fimar TS1, Use And Maintenance

Page: 25 / 154

346-
075-0.
fm
ID
M
- 3 - English language
EN
GENERAL AND SAFETY INFORMATION
– Handle the appliance following the information on the packaging, on the appliance and in
the instructions for use.
– During transport, handling and installation, do not hit or drop the appliance to avoid dam-
aging its parts.
– Personnel authorised to perform power connections must make sure the mains specifi-
cations match those on the plate, that the mains has a circuit breaker and components in
accordance with current laws and regulations.
– Do not tamper with, remove or bypass the safety devices installed on the appliance for
any reason.
– The user should carefully read the entire manual and make sure all parts are understood,
especially all the information concerning safety.
– Upon first appliance use, if necessary, simulate use to identify controls especially power
on and off controls.
– Always wear protection devices on upper limbs when placing or removing containers from
the chamber. Some containers may absorb heat and cause burns.
– Do not obstruct appliance ventilation slots to avoid excessive overheating which could
damage the appliance.
– Only use the appliance as intended. Improper appliance use or use other than that
admitted may cause personally safety risks and injuries and economical damages.
– The manufacturer is not liable for any damages due to improper appliance use, fail-
ure to follow the instructions in the user manual and appliance tampering or
changes without official authorisation.
– All work that requires specific technical skills or abilities (installation, power connections,
etc.) must only be performed by authorised personnel with recognised experience in the
specific field.
– Do not use the appliance with broken or inefficient power wires. When a defect is found, im-
mediately stop the appliance in safety conditions and have authorised and qualified personnel
replace wires.
– Before cleaning, maintenance, etc., TURN OFF THE POWER (or unplug the power
cord) and make sure the processing area is fully cooled.
– Clean the appliance after every use or when reasonably needed, also according to the
type of food product processed.