Fimar TS1, Use And Maintenance

Page: 27 / 154

346-
075-0.
fm
ID
M
- 5 - English language
EN
GENERAL AND SAFETY INFORMATION
The illustrations depict the safety and information signs affixed on the
equipment.
–
Burn hazard: warns to be careful of hot surfaces.
– Electrical shock hazard: this indicates the need to turn power off (or
unplug the power cord) before working on electrical connections.
UNPACKING, HANDLING AND INSTALLATION INSTRUCTIONS
– The appliance is delivered packaged in a specific container and, if necessary, suitably
stabilised with shockproof material to ensure its integrity.
Packaging may be on a pallet according to appliance features, destination and transport
means to facilitate handling.
All information required for handling (loading and unloading) in safe conditions is indicat-
ed directly on the packaging.
– The package must be handled according to its specifications (weight, dimensions, etc.).
For limited dimensions and weights, the package may be handled manually. Otherwise,
use a lifting device with suitable capacity.
Upon receiving the appliance, make sure all components are integral. In the event of
damages or missing parts, contact your local dealer to arrange for future procedures.
– Installation must be performed by expert and authorised personnel who must previously
ensure that the electrical mains meet specific current laws, regulations and standards in
effect in the country of use.
– Before installing the appliance, make sure the selected site is suitable, sufficiently venti-
lated and lit, stable and with surrounding areas sufficient for easy cleaning and mainte-
nance. Also make sure the support surface is stable, level and easy to clean to avoid the
risk of dirt accumulations and food product contamination.
Personnel authorised to perform electrical connections must make sure the mains
grounding system is efficient and that the mains voltage and frequency match the
data listed on the appliance identification plate.
For appliances with special features (shape, weight, dimensions, etc.) the information in-
cluded in this paragraph may not be thorough. Any additional information is listed in the par-
agraph on "Lifting Procedures" for each single appliance.