Filtec FT-70c, Service And Technical Reference Manual

Page: 101 / 243

FT-70 Fill Level Inspector Service Manual
5-6
Selecting the FT-70’s Operating Mode
There are two modes of operation for the FT-70:
• The Operate Mode limits the operator's access to those
functions where no parameter value changes can be made. The
Operate Mode is the normal operating mode for the FT-70.
• The Calibrate Mode gives the operator access to all system
functions and the ability to make parameter value changes,
and perform calibration procedures. The FT-70 is equipped
with a password feature which prevents unauthorized
personnel from entering the Calibrate Mode.
Selecting an Operating Mode
1. Press Key 5 until SYSTEM DISPLAY appears.
2. Press the Arrow Key to select either the OPERATE or
CALIBRATE mode. The current operating mode is displayed.
3. If the Password Protect Function is enabled, you must enter the
password before you can enter the Calibrate Mode. If you enter
the wrong password, press the Arrow Key and try to reenter it.
Note
The FT-70 automatically reverts to the Operate Mode if the
machine is idle (no keys are pressed) for more than 30 minutes. All
outstanding parameter changes will be entered automatically.
Industrial Dynamics Company, Ltd. © 40256-0600