S.CON1M/MA System
9
Key Features
•
10Base-T, 100Base-TX and 100Base-FX modes of operation
•
Supports FEF feature (Far-End-Fault)
•
Supports bi-directional Fault Propagation (FO>TP and/ or TP>FO)
•
Supports SLE (Subscriber Link Emulation)
•
Comprehensive LED support :Indicators for Link, Activity (Tx, Rx), MA
active, FDX, 100M, SD (signal detect) and power status
•
Hardware based 10/100, Full/Half, Flow control and Auto-Negotiation
•
Wire speed reception and transmission
•
Supports 1K Mac addresses
•
Frame length range: 64 ÷ 1536 bytes
(VLAN tagged frames are thus
supported and can pass thru the converter)
•
Desktop, shelf or wall mount installation
•
ETR
: Extended Temperature Range
(-10
°÷
70
°
C
) option for all
S.CON1M/MA models
•
Optional -48Vdc Power Supply for all S.CON1M/MA models (
PS48
)
•
RS232 Console port
for Out-band management on the front panel
•
SNMP management and MA support.
•
Telnet support from an SNMP management station or from the
Terminal connected to the RS232 port
•
Loop-back on Fiber Optic Link (via management only)
General Description
All S.CON1M/MA models have identical functionality and performance. Therefore, any
description or feature of one model refers to all other types.
The RJ-45 port operates in Auto-Negotiation mode: It may operate in 100Base-TX or
10Base-T and in both FDX and HDX modes, depending on the type of device to which
it is connected.
The TP port is a shielded RJ-45 port, cat.5, and 100m. The port can operate as an
MDI-II or MDI-X port depending on the MDI-II /MDI-X selector.
The S.CON1M/MA is equipped with an MDI-II/MDI-X selector on the front panel to
allow connection of either a switch/hub or a station, allowing the deployment of either a
straight or cross-twisted pair cable.
The F/O port supports 100Base-FX transmission in both FDX and HDX modes.
The conversion process creates a BMD, allowing unprecedented functionality and
performance. The F/O port is setup by default to operate at 100Mbps FDX
For optimized set-up, the S.CON1M/MA is equipped with an array of 7 DIP switches
accessible from the front panel.
