S.CON1M/MA System
22
15 - Specifications
Standard Compliance
IEE 802.3u, 100Base-TX-FX, IEEE 802.3: 10Base-T
Auto Negotiation on TP, IEEE 802.3u
Back pressure and IEEE 802.3x compliant Flow control.
MIBs: MIB II (RFC1213) and FibroLAN private MIBs
Supports 1K Mac addresses
Frame length range: 64 ÷ 1536 bytes
Conversion Method:
BMD
(
B
uffered
M
edia
D
omain) with Fault Propagation and SLE features
Port based VLAN support
100BaseTX port
•
RJ-45 connector (10/100Base-TX port)
•
Auto Negotiation (default) or Manual mode (Auto-Negotiation disabled)
•
100m over UTP/STP 100ohm cat.5 cable
•
Auto-polarity correction
••••
MDI-II/MDI-X selector on the front panel
Diagnostics
••••
10/100Base-TX port: Link, Activity (Tx, Rx), Full Duplex, 100Mbps
••••
100Base-FX F/O port LEDs: Link, Activity (Tx, Rx) SD), MA active
••••
Power: power LED indicator
Environmental /Physical
Power Supply
S.CON1M/MA with standard AC P.S.
S.CON1M /MA with DC P.S
100 ÷ 240 VAC, 50 ÷ 60 Hz. IEC connector
-36 ÷ - 72 VDC (PS48)
Power consumption
S.CON1M /MA all models: 10 watts max
Operating temperature:
0°
÷
45°C (32-113
°
F)
Storage temperature:
-20
°
÷
+ 80
°
C (-22
°
F
÷
176
°
F)
Humidity:
10%
÷
90% non-condensing
Safety:
UL 60950, EN60950
Emissions: FCC
part 15, Subpart B Class B, VCCI
Class B
ICES
003: 1997,Class B; EMC Directive
89/336EEC
Dimensions/weight:
120x170x40mm/0.5kg (excluding wall-
mount type) 4.7”x6.7”1.6”/1lb
Specifications are subject to change without prior notice
100Base-FX port
•
1310nm multi-mode
, Duplex SC (Optional ST), 62.5/125 µ fiber, Distance: 2000m
(6500ft) Full/half duplex switch selection (Mode Setup S4 Dip switch)
Minimum output power: -18dBm
Input sensitivity: -32dBm
•
Single Mode Fiber
: S.CON1M /SMR7, SMR, SM, SM/L/L2/L3/LX (7,15,25,
40,70,100,150Km)
Minimum output power: -20, -16, -15, -11, -2, -5,0 dBm (respectively).
Input sensitivity: -30, -30, -33, -33, -35, -38, -38 dBm (respectively).
•
Single Strand-Fiber (SFS):
S.CON1M / SMRF13, SMRF15 (15Km)
Minimum output power: -15 dBm
Input sensitivity: -30 dBm
