S.CON1M/MA System
11
5 – Front Panel components
1-
MDI-II / MDI-X selector
2-
10/100Base-TX connector port (shielded RJ45)
3-
Twisted pair operation (3 LEDs, 4 functions)
Link/ Act
- twisted pair link present (LED steady lit)
When blinking implies activity (transmit or receive mode)
FDX
- full duplex operation
100M
- TP is working at 100Mbps (when the LED is off, the speed is 10Mbps)
4-
SC fiber optic connector (left/TX & right/Rx); ST connector (S.CON1M/MA/T model)
5-
Fiber optic LED indicators
Link/ Act
-
a. steady lit (green) F/O Link OK, MA not Active
b. blinking: data received/transmitted. When MA is Active then this LED will
be blinking even if no user data is received/transmitted
SD
(signal detect) optical signal present
MA active: steady lit (amber):
the S.CON1M/MA is connected to a remote MA
enabled and active device.
6-
MODE SETUP 7 positions DIP switch
7-
POWER LED indicator
LED lit Main power supply installed and operating.
8-
MiniDIN connector for management set-up (RS232 Console port)
9-
Management module status LED indicators
RCV
– the internal SNMP agent is receiving data
Ready
–LED is blinking implies that the SNMP agent logic is in the initialization
stage. When LED steady lit: SNMP agent is ready
1
2
3
4
5
6
7
8
9
