Falcon R-Class | User Guide
132
VLAN Parameters
802.1Q Tagged
Specify whether frames can hit the action according to the 802.1Q tagged.
The allowed values are:
•
Any
: Any value is allowed ("don't-care").
•
Enabled
: Tagged frame only.
•
Disabled
: Untagged frame only.
The default value is "Any".
VLAN ID Filter
Specify the VLAN ID filter for this ACE.
•
Any
: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
•
Specific
: If you want to filter a specific VLAN ID with this ACE, choose this
value. A field for entering a VLAN ID number appears.
Tag Priority
Specify the tag priority for this ACE. A frame that hits this ACE matches this
tag priority. The allowed number range is
0
to
7
or range
0-1
,
2-3
,
4-5
,
6-7
,
0-3
and
4-7
. The value
Any
means that no tag priority is specified (tag priority
is "don't-care".)
4.8.2.11
ACL Status
This section shows the ACL status by different ACL users. Each row describes the
It is a conflict if a specific ACE is not applied to the hardware due to hardware limitations. The
maximum number of ACEs is
256
on each switch.
Web GUI: Monitor > Security > Network > ACL Status
Figure 4-81: ACL Status
Table 4-77: ACL Status Parameters
User
Indicates the ACL user.
ACE
Indicates the ACE ID on local switch.
