Falcon R-Class | User Guide
81
Queue Scheduler
Weight
Controls the weight for this queue. The default value is "17". This value
is restricted to 1-100. This parameter is only shown if "Scheduler Mode"
is set to "Weighted".
Queue Scheduler
Percent
Shows the weight in percent for this queue. This parameter is only
shown if "Scheduler Mode" is set to "Weighted".
Port Shaper Enable
Controls whether the port shaper is enabled for this switch port.
Port Shaper Rate
Controls the rate for the port shaper. The default value is 500. This value
is restricted to
100
-1000000 when the "Unit" is "kbps", and it is
restricted to 1-
3300
when the "Unit" is "Mbps".
Port Shaper Unit
Controls the unit of measure for the port shaper rate as "kbps" or
"Mbps". The default value is "kbps".
Port Shaper Rate-
type
The rate type of the port shaper. The allowed values are:
•
Line
: Specify that this shaper operates on line rate.
•
Data
: Specify that this shaper operates on data rate.
QoS Egress Port Tag Remarking
This section provides an overview of QoS Egress Port Tag Remarking for all switch ports.
Web GUI: Configuration > QoS > Port Tag Remarking
Figure 4-54: QoS Egress Port Tag Remarking
By clicking on any port, you may configure the selected port (see example for port 6).
Figure 4-55: QoS Egress Port Tag Remarking
