Falcon R-Class | User Guide
141
Dynamic ARP Inspection Table
Port
Switch Port Number for which the entries are displayed
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry
IP Address
User IP address of the entry.
Navigating the ARP Inspection Table
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show the
first 20 entries from the beginning of the Dynamic ARP Inspection Table. The "Start from port
address", "VLAN", "MAC address" and "IP address" input fields allow the user to select the starting
point in the Dynamic ARP Inspection Table. Clicking the
Refresh
button will update the displayed
table starting from that or the closest next Dynamic ARP Inspection Table match. In addition, the
two input fields will - upon a
Refresh
button click - assume the value of the first displayed entry,
allowing for continuous refresh with the same start address. The >> will use the last entry of the
currently displayed table as a basis for the next lookup. When the end is reached the text. No more
entries" is shown in the displayed table.
Use the <<
button to start over.
Authentication Server Configuration (AAA)
This section allows to configure the various Authentication Servers.
4.8.4.1
Radius Server Configuration
This section allows you to configure the
RADIUS
servers
.
Web GUI: Monitor > Security > AAA > Radius
Figure 4-89: Radius: Server Configuration
Table 4-85: Radius: Server Configuration Parameters
