Falcon R-Class | User Guide
89
QCE Configuration
Note: By clicking on the
sign in the previous QoS Control List Configuration display, we get the
below QCE Configuration display, by means of which we can select the required QCE Parameters.
This section allows to edit/insert a single QoS Control Entry at a time. A QCE consists of several
Parameters. These Parameters vary according to the frame type that you select.
Web GUI: Configuration > QoS > DSCP Translation
Figure 4-60: QCE Parameters displays
Table 4-56: QCE Configuration Parameters
Port Members
Check the checkbox button to include the port in the QCL entry. By default, all
ports are included.
Key Parameters
Key configuration is described as below:
•
DMAC
: Type Destination MAC type: possible values are unicast (UC),
multicast (MC), broadcast (BC) or 'Any'.
•
SMAC
: Source MAC address: xx-xx-xx (24 MS bits OUI) xx-xx-xx-xx-xx-xx or
'Any'. If a port is configured to match on DMAC/DIP, this field is the
Destination MAC address
•
Tag
: Value of Tag field can be 'Untagged', 'Tagged'
, 'C-Tagged', 'S-Tagged'
or
'Any'.
