FiberHome AN5516-04, Quick Installation Manual

Page: 31 / 36

19
Installing the Cabinet Door
Exercise care in operation especially when cl
the cables.
Caution
The AN5516-04 can be installed in the follow
manuals for the procedures of installing the c
Note
Cabinet Model Manual De
20
Post Installation Inspection
20.1
Checking the Connection and Layout of
19-inch cabinets (4102596 to
4102599) Quick Insta
(4102596 t
21-inch cabinets (4102589 to
4102592) Quick Insta
(4102589 t
21-inch cabinets (404000068 to
404000071) Quick Insta
(40400006
21-inch cabinets (404000337 to
404000340) Quick Insta
(40400033
No. Items to Check
1
The specifications, routes, cross-sectio
arranged are compliant with the constr
arranged in good order, without damag
2
The plugs of the cables are clean and
are up to standard. The plugs are all co
3
When cables must be arranged along
distance between them and the ventila
be no less than 10 cm. If the distance b
When the connection and layout of the cables
conduct the connectivity test and ensure that
Caution
2
cabinet is larger than 0.8 m, installers s
4
Layout of the fiber pigtails:
1. The fiber pigtails are not arranged t
intertwined at the turning points. Th
after being arranged in order. Do no
leave pressure marks on the fiber p
2. Fiber pigtails can move forward or b
but cannot bend in right angle.
3. After the fiber pigtails are arranged
objects upon them.
27
losing or opening the doors to avoid damage to
wing cabinets. Please refer to the following
cabinet doors.
escription
f Wires and Cables
allation Guide for the 19-inch Cabinet (600 mm-deep)
to 4102599)
allation Guide for the 21-inch Cabinet (300 mm-deep)
to 4102592)
allation Guide for the 21-inch Cabinet (300 mm-deep)
68 to 404000071)
allation Guide for the 21-inch Cabinet (340 mm-deep)
37 to 404000340)
Means
onal area, and position of the cables
ruction plan drawing. The cables are
ge to their sheath.
Visual
inspection
intact; and the plugs made onsite
onnected correctly and firmly.
Visual
inspection
the upper part of the cabinet, the
ation hole on the cabinet top should
between the cabling rack and the
Visual
inspection
s and wires are completed, installers should
the signals are transmitted normally.
7
g
should set up a cabling ladder.
p
too closely to each other or
he paired fiber pigtails are bound
ot bind with too much force and
pigtails.
backward freely in the fiber fastener
, do not put any cables or other
Visual
inspection
7