FiberHome AN5516-04, Quick Installation Manual

Page: 28 / 36

LC/PC Type Optical Fiber
Connector
SC/PC Type
Connector
17
Connecting the Optical Fiber Jum
Note
Select the right type of the optical fiber jumpe
local equipment and opposite end equipment.
to two types of optical fiber connectors: LC/PC
Caution
See the table below for the major specifications a
SC/PC optical fiber connectors. When the equipm
advisable to use the short optical fiber connectors
Type Short Optical Fiber Connector
LC/PC 31 mm
17.1
Connecting the External Optical Fibers
Caution
SC/PC 39 mm
 The open corrugated pipes should not be
pipe with the diameter of 32 mm should ca
of 2 mm.
 It is recommended that the corrugated pip
2
Internal pipe
External pipe
24
 It is recommended that the corrugated pip
 Arrange the corrugated pipe outside the c
room.
e Optical Fiber SC/APC Type Optical Fiber
Connector
per
r according to the type of the optical interfaces on the
. The optical interfaces on the AN5516-04 correspond
C and SC/PC (SC/APC).
and appearance of the commonly used LC/PC and
ment is mounted in a 300 mm-deep cabinet, it is
s.
Long Optical Fiber Connector
48 mm
55 mm
e overloaded with optical fibers. An open corrugated
arry no more than 60 optical fibers with the diameter
pe inside the cabinet should be about 10 cm long
4 4
pe inside the cabinet should be about 10 cm long.
cabinet according to the conditions of the equipment