9
Preparations for Cable Connection
Internal cables are the wires and cables th
are usually connected before delivery. Ins
on site. The items to check include wheth
wires and cables are properly and neatly a
whether incorrect insertion or poor insertio
The installers can choose the top access
according to the equipment room and the
access wiring mode as an example for de
The AN5516 04 can use the PDP296B (3
Note
Before laying out wires and cables, you ne
limited for operations, remove the baffle a
After you have completed layout of wires
original places.
The AN5516-04 can use the PDP296B (3
specifications and pin definitions of the PD
For a cabinet equipped with mouseproof h
on the top fasten the mouseproof hop po
Preparing Wiring Holes on the Cabinet
Tip
Note
L
M
R
on the top, fasten the mouseproof hop-po
external wires and cables are led into the
well arranged.
For a cabinet equipped with cover plate o
or bottom of the cabinet, determine the po
and number of wiring holes according to t
plan. Pierce the cover plate with diagonal
holes. The following introduces how to ma
Recommended areas and
sequence for making wiring holes
Caution
Prepare the holes from near to far in sequ
Polish the raw edges of holes so that they
L
M
R
L
M
R
1
13
n
hat are connected inside the cabinet. These cables
stallers should check the connection of internal cables
er the cable distribution is reasonable, whether the
arranged, whether the plugs are connected firmly,
on exists, and whether any part is missing.
wiring mode or the floor access wiring mode
installation site conditions (This guide uses the top
escription).
000068) Please refer to
Hardware Description
for the
Fastening the mouseproof hop-
pockets on the top of cabinet
eed to remove the front panel of the PDP. If space is
at the bottom of the PDP.
and cables, restore the front panel and baffle to their
000068). Please refer to
Hardware Description
for the
DP.
hop-pockets
ckets after
ckets after
cabinet and
n the top
osition, size
he wiring
pliers at desired positions to make wiring
ake wiring holes on the top of the cabinet.
Making a wiring hole
uence.
y will not cut hands or cables.
Pierce the cover plate
with diagonal pliers
along the edges desired
for making a wiring hole
3
3
Summary of Contents for AN5516-04
