FiberHome AN5516-04, Quick Installation Manual

Page: 30 / 36

18
Connecting the Serial Port Line
Note
Insert the RJ-45 connector of the serial port li
HSUC / HSUB card.
The serial port line is used to connect the C
card and the serial port of the local compute
1
Insert the DE-9 connector of the serial port lin
tighten the screws.
2
Tip
Make sure the computer is powered off when
(RJ-45 interface) on the computer.
1
26
ine into the CONSOLE / ESC interface of the
ONSOLE / ESC interface of the HSUC / HSUB
er. It is used only in commissioning or debugging.
ne into the serial port of the local computer and
2
n connecting the DE-9 connector to the serial port
6