FiberHome AN5516-04, Quick Installation Manual

Page: 26 / 36

15
Connecting the 64-conductor Aud
Lead the 64-conductor audio
interface cable through the wiring
hole on the top of the cabinet, and
route it downward along the wiring
channel on the side of the cabinet.
Lead the 64-conductor audio
interface cable through the
fiber passage unit
Connected to MDF
1
2
Insert the HDXS 64-conductor
plug into the audio interface of
the corresponding card.
fiber passage unit.
3
Correct Way to Install Screws y
1
Insert the cable plug completely into the desire
the card panel surface.
2
Pre-tighten the screw: Tighten the screw with
on the same line with the screw.
3
Make sure that the screw threads can get a go
and tighten the screw carefully.
Caution
22
 Please select an appropriate tool. It is advi
1# screwdriver head. The diameter of the s

Do not operate forcefully while tightening t
larger than 2.5 Kgf.cm.
io Interface Cable
Cross
screwdriver
1
2
3
ed interface so that the end face of the plug aligns with
moderate force, making sure that the screwdriver is
ood grip (the resistance encountered is small),
2
ised to use a flat screwdriver or a screwdriver set with
screwdriver (metal rod) is no larger than 4 mm.
he screw. Make sure that the moment of force is no